A focus on telescopic pool enclosures

Pool enclosures with a telescopic opening offer numerous advantages, which explains their success in France. Indeed, telescopic enclosures have the advantage of: 

• Opening entirely: thanks to their system of several nesting modules, telescopic pool enclosures take up very little space when open. The pool can even be entirely uncovered by installing a deck extension at one of the extremities of the pool. This enables you to fully enjoy your in-ground pool in the peak season.
• Adapting to your wishes:  as all the modules are mobile and independent, you can choose to use the opening and closing system on the right, left or in the centre and uncover the pool area of your choice with partial opening.
• Being easily manipulated: thanks to their rollers, with or without a ground rail fixed to the deck or terrace, the modules of a telescopic enclosure can be pushed very easily. For greater comfort, it is also possible to motorise telescopic enclosures, which enables fast and automatic opening and closing thanks to a simple press of a button on the remote control.
• Existing in numerous customisable models:  by choosing a telescopic enclosure, you give yourself the opportunity to choose among various heights (low-profile, mid-height and full-height), various dimensions, as well as different shapes (curved, dome or angled) and different materials for both the structure (aluminium or wood) and for the walls (honeycomb polycarbonate, single- or double-glazing) because this type of product is generally made to measure to adapt to your needs and wishes.

Before launching the project to cover your pool with a telescopic pool enclosure, you should note that this type of enclosure has certain inconveniences. Each project must therefore take the following particularities into account: 

Telescopic enclosures are more expensive than other models because they are high-end products that are often made to measure with quality materials. Thus, it is not the most economical option to cover your swimming pool, especially of it is motorised.

Some models of telescopic pool enclosures require a little space, so you need a deck with sufficient surface area around the pool to install them.

Although a telescopic enclosure can effectively cover all shapes of pool, its modules must be able to nest into each other. It can thus accommodate the shape of most pools, but cannot perfectly follow the curves of a bean-shaped pool, for example.

Depending on its height and surface, the installation of a telescopic enclosure may require certain administrative procedures to file a declaration of works or obtain a building permit before starting construction.

Like all pool enclosures, telescopic enclosures require regular maintenance to remain in good condition and to extend their service life. It is recommended to clean your telescopic pool enclosure twice a year, before winterising and at the beginning of the peak bathing season.

To maintain the structure (aluminium, wood, etc.), glazing (glass or plexiglas) and the walls, you should avoid the use of pressure washers and abrasive sponges, which can cause scratch marks.

Ideally, use warm water with non-aggressive soap, soft cloths and a squeegee. Once you have finished cleaning, rinse the pool enclosure with clear water. You should also regularly clean the rails and the deck around the pool to ensure that opening the telescopic enclosure remains easy, fluid and effortless.

To do so, you can remove dirt, dust and dead leaves with a broom before greasing the equipment again. Don't forget that it is essential to adapt the maintenance to the materials used for the structure and the walls of the telescopic pool, because each has its own characteristics and qualities.